Universal Brake Pedal, 7 Inch Booster, 1 Inch Master Cylinder

Description

Universal power brake upgrade that retains the brake pedal under the floor, automatic transmission only, Mounts to inside of frame rail or boxing plate to fit multiple vehicles, bracket mounts 2" off of frame, Features a 7" single diaphragm brake booster, 1" bore Corvette style master cylinder w/ 1/2"-20 & 9/16"-18 IFF outlets, and 10-1/2" brake pedal assembly, Brake pedal is 1/2" steel plate and offers a 6 to 1 pedal ratio, round rubber pad included, Featured on Season 4 of Car Masters: Rust to Riches; the Zephyr Gotham Garage Build
Universal Brake Pedal, 7 Inch Booster, 1 Inch Master Cylinder
Sku # 9106005
Mfr. Part # 9106005
Condition
New
Brand
Speedway Motors
Sold
Each
Details
Info
Learn more about selecting the proper master cylinder for your vehicle by reading our tech article,
Universal bracket assembly converts under floor mount master cylinder applications to power brakes
Power brake pedal assembly mounts to inside of frame rail or boxing plate
Retains through the floor pedal for period looks while improving braking safety
For automatic transmission applications only
Pedal ratio is 6:1 for ease of braking and works with all disc/drum setups
Corvette style cast iron master cylinder provides line access from either side of unit and includes port plugs
Master cylinder utilizes 1-inch bore with dual reservoirs for additional brake system safety w/ 1/2"-20 & 9/16"-18 IFF outlets
Single diaphragm power brake boosters are compact and works with any engine providing at least 17 in/hg of vacuum
Power Brakes for Your Early Hot Rod
There is no denying that early braking systems on the cars we love to build, like Model Ts, Model As, and other pre-war rides, were rudimentary to say the least, and that is putting it lightly. These early mechanical brake systems may have been OK for the speeds of the time, but drop a hopped-up Flattie in it, or even more power via a small-block Chevy, and you are really asking for trouble when you must hit the "whoa"pedal after using too much of the "go"pedal.
Updating these classics to "juice"brakes (hydraulically actuated) has been the thing to do for decades and we are here to make that conversion easier for you. From disc and drum conversions, brake lines, proportioning valves, fittings, and more, Speedway Motors has everything you need to convert to hydraulic brakes on your pre-war hot rod, including this universal frame mount brake booster and master cylinder combo. These are the basis for your new hydraulically actuated braking system in your pre-war car and can easily be used to retain that period looking under floor master cylinder/pedal assemblies in '40s and '50s cars and trucks when under dash or engine compartment room prevents adding a power brake booster and relocating the master cylinder to the engine compartment firewall.
A Power Brake Conversion That Fits Most Early Hot Rods and Trucks
Adding power brakes to a pre-war hot rod is not always easy. Most of these original brake systems featured a mechanical brake system and early hydraulic conversions fitted the brake master cylinder under the floor, which did not always provide the correct leverage for optimal braking. Upgrading to power brakes using our universal brake booster and master cylinder with frame mount pedal assembly is a much better solution. The manual to power brake conversion retains the through the floor pedal assembly for period looks, but provides a solidly built mounting bracket, a compact power brake booster, and dual reservoir brake master cylinder that works with any open C-style or boxed frame member. The period look brake pedal passes through the floor and works with automatic transmission applications only. This kit works great in conjunction with a front disc brake upgrade as well.
Our frame mounted power brake booster and master cylinder combo kit features a zinc-plated 7-inch single diaphragm power brake booster that is only 3-3/8-inch thick, allowing the brake booster and master cylinder combo to fit within your hot rod's frame with ease. The power brake system works with engine vacuum of at least 17 in/hg or can be paired with an for those with aggressive cam profiles that produce insufficient vacuum. The power brake booster assembly includes mounting hardware for the booster and the master cylinder that mounts to it. Additionally, the booster includes an adjustable master cylinder pushrod and threaded pedal rod with lock nut for pedal height adjustment. The included brake booster check valve uses standard 3/8-inch brake booster vacuum hose for your engine's vacuum source (carburetor base plate/spacer or intake runner vacuum tree).
The included Corvette-style brake master cylinder features a 1-inch bore with front and rear divided fluid circuits for the modern safety of a split braking system. Our master cylinder is designed for disc/drum applications with ports on both sides so that you can route your brake lines inboard or outboard however you wish for function and aesthetics. This brake master cylinder is ideal for a front disc brake upgrade solution. The ports are 1/2-20 inverted flare for the front circuit and 9/16-18 inverted flare for the rear circuit. Inverted flare plugs are included to block off the opposite side unused ports. For those crafting their own 3/16-inch brake lines we offer a to allow direct connection. If you choose to utilize pre-made lengths of 3/16 brake line our in 1/2-inch and 9/16-inch sizes will allow direct connection to our master cylinder without having to cut and flare brake lines.
Universal Mounting Solution Fits Any Frame Style
We have designed our frame mount under floor universal power brake kit to work with just about any frame configuration. As shipped the main mounting bracket will work with any stock or aftermarket rectangular boxed frame member, or an original C-channel type frame that has been boxed with steel plate. If your C-channel frame has not been boxed we provide an additional bracket attachment/extension that fits within the C-channel, providing a 2-1/4-inch mounting extension, that can be bolted or welded inside the C-channel to allow the main mounting bracket to attach to and sit at the proper spacing. We include all mounting hardware for both brackets, so if you do not own a welder installation takes nothing more than some careful measuring and a sharp drill bit! The brake pedal itself is a 6:1 pedal ratio and includes a 3-3/8-inch diameter classically styled round rubber brake pedal pad. Our kit makes a manual to power brake conversion easy, no matter the vehicle.
Charts
(GIF)
Installation Tips
A brake light switch is not included; a can be installed in the unused front master cylinder outlet by using an to operate brake lights
A brake proportioning valve will be required and is sold separately, we suggest an or an
A 3-3/8-inch round rubber brake pedal pad is included in the kit that is threaded 1/4-inch NPT and a is available
Pedal arm may need to be bent left or right to line up with the proper pedal position for your vehicle
DOT 3 or DOT 4 brake fluid is suggested
The pedal assembly (with the booster and master cylinder attached to it) will measure 15.5" from the center of the pedal pivot to the rearmost point of the master cylinder
The forward-most point of the main mounting bracket is 1.5" forward of the brake lever pivot
The brake pedal arm measures 10.5" from the center of the pivot point (and has a 6-to-1 pedal ratio) and is 1/2" thick
The widest point of this assembly will be at the booster, which will be 7.5"
The 4-bolt bolt pattern where the main bracket attaches to the frame rail (or the secondary bracket) is 2.25" x 3.5"
The secondary bracket measures 3.75" x 11" and has a longer bolt pattern where it might attach to the frame rail. That 4-bolt pattern is 2.5" x 9.75"
Mounting bracket sets off frame rail 2" for clearance
Brake booster Bolt Pattern is 3-3/8" square
Master cylinder bolt hole spacing is 3-3/8" center to center
Specs
Sold in Quantity
Kit
Finish
Powder Coated
Reservoir Type
Integral
Balance Bar
No
Overall Length
17
Brake Booster Included
Yes
Brake System Type
Disc/Drum
Position
Frame
Outlet Count
Tandem/Both Sides
Master Cylinder Material
Steel
Master Cylinder Mount Type
Reverse
Master Cylinder Count
1
Pedals Included
Brake
Outlet Fitting
1/2"-20 IFF
Outlet Fitting 2
9/16"-18 IFF
MFG. Part #
9106005
Brake Booster Type
Vacuum Diaphragm Single
Brake Booster Diameter
7 Inch
Reviews
I would buy this product again. Most definitely.
Rated
by Danny on February 23, 2022
Summary:
Everything I have purchased from Speedway has been top quality. the installation is easy and the instructions thorough.
Pros:
great quality for the price. good fitment.
Yes, I recommend this product.
Perfect fit for my F1.
Rated
by Bob on July 29, 2021
Summary:
Tech support was not sure about fit without slight modifications, but bolted right in to my F1 and works as expected. Arrived ahead of predicted schedule and easy install.
Pros:
Fits as expected and works well. Arrived on time
Yes, I recommend this product.
I would definitely buy it again
Rated
by Sathe on June 20, 2021
Summary:
This part fit great and easy to use
Yes, I recommend this product.
I haven't got it installed yet.
Rated
by Stephen White on April 07, 2021
Summary:
Looks like a good product to take the place of the original parts
Yes, I recommend this product.
excellent quality!
Rated
by weeds on December 28, 2020
Summary:
great fit and application for my hot rod
Yes, I recommend this product.
Related Items / Suggested Parts
Speedway Brake Pedal Foot Pad, Round, Stainless Steel
Brake Pedal Pad, Polished Aluminum, Round Rubber
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 70 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.